As a special garbage sorting vehicle, the garbage sorting truck has a heavy workload, not to mention everyone knows, so the frequency of use is very large.
So, what should we pay attention to when we usually use it, and how should we quickly troubleshoot problems? The following editor will give you a detailed explanation!
Everyone has seen the details of the garbage truck. So, what do you think we should pay attention to when using it?
one.Precautions for the use of garbage trucks
- When leaving the garbage truck, the staff must apply the handbrake and turn off the vehicle.
- When you have to stop on a slope, in order to prevent safety accidents, you must put anti-skid blocks on the rear wheels.
- Pay more attention to the working environment and your own life safety when using the garbage truck.
- In order to protect personal safety during work, it is best to wear work clothes, gloves, helmets, and safety shoes.
- The operation of sorting garbage truck is best carried out in a ventilated place.
- No driving is allowed when the rear door of the garbage truck is opened. When driving with the rear door open, the garbage in the hopper may “scatter” and cause an accident.
- When the garbage truck is working, it is not allowed to enter the “box” or “hopper”. If you need to check and adjust, you must turn off the flame and remove the key. Because this may cause accidents such as pinching and involvement due to misoperation and other reasons.
- It is strictly forbidden to throw in explosive or combustible objects when collecting garbage to prevent fire. The garbage truck is forbidden to throw in construction waste to avoid damage to the parts.
- When opening and closing the hopper during work, the operator should carefully confirm the surrounding people or objects, and try to avoid causing personal accidents or property damage accidents.
- If the hydraulic system of the garbage truck is working abnormally, it must stop working immediately to find out the reason and eliminate the malfunction. Construction operations must not be forced.
- Try not to flush water into the hydraulic oil tank when sorting garbage trucks for cleaning and maintenance. Regularly check the hydraulic oil level. When the hydraulic oil is insufficient, it must be filled in time to ensure that all oil connections are not leaking. If there is oil leakage, it must be repaired or replaced.
Tow.Troubleshooting of the garbage truck
There is a problem with the hydraulic mechanism when the garbage truck is working. We should first check whether there is any problem with the power take-off and whether the hydraulic oil in the hydraulic oil tank is sufficient.
1.When the hydraulic mechanism is not operating, it should be checked according to the following steps.
a. Is there enough oil in the hydraulic oil tank? If it is not enough, hydraulic oil must be added;
b. During the manual operation, observe the oil inlet pipe between the oil tank and the oil pump to see if there is any phenomenon of oil bombardment due to aging. If this phenomenon occurs, the oil inlet pipe should be replaced.
c. Check whether the gear oil pump is out of order-accurately install the pressure gauge and observe whether the pressure gauge reaches the specified value;
d. If all the pressure regulating bolts are screwed in and the oil pressure is not up to the specified oil pressure, then the gear oil pump has failed, and it can be solved by replacing the gear oil pump;
e. If the gear oil pump works normally, the spool of the multi-way reversing valve is blocked. It is necessary to remove the reversing valve to remove impurities in the spool.
- The hydraulic mechanism of the garbage truck has action but is weak. We should check whether the gear oil pump fails and whether the system pressure reaches the specified value.
- When the hydraulic mechanism becomes very sluggish, we should check whether the gear oil pump fails, the oil suction filter and the oil return filter core are blocked.
After the editor patiently explained, I hope it will be of some help to you!
