Chengli Automobile provides flatbed trucks with truck-mounted cranes, flatbeds with ladders, multi-purpose for one vehicle, and multiple functions in one. It has the advantages of high working efficiency, low cost of using vehicles and wide business scope.
The flatbed truck with truck crane, also known as flatbed ladder truck truck, is a combination of truck crane and flatbed truck. It has the basic functions of two types of truck crane and flatbed truck. Lifting and transporting goods can also be used for engineering vehicles such as excavators, harvesters, bulldozers, etc. It is often used for various loading and unloading, installation and lifting operations, suitable for field lifting, working in narrow places such as stations, ports, warehouses, construction sites, etc. ,
he picture above shows the Dongfeng Special Dealer’s first four rear eight flatbed trucks with truck-mounted cranes. It adopts the special chassis of Dongfeng Special Dealer’s truck-mounted crane. , Shantooth 9-speed or 12-speed gearbox, 5.5 tons at the front axle, 11.5 tons at the rear axle, 300mm beam, equipped with XCMG 14-ton five-section boom crane, 360-degree full rotation, working radius 15.8 meters, lifting height 17.8 meters When XCMG’s 14-ton five-section arm selects a double pump, the flow rate is large, and multiple actions can be operated at the same time.
The truck-mounted flatbed truck is mainly composed of three parts: the truck-mounted special chassis, the brand crane, and the cargo box. The function of the truck-mounted flatbed is mainly reflected in the cargo box. Compared with the truck-mounted crane, there are mainly the following aspects The difference:
1. Since the slope occupies a distance of about 80 cm, the cargo box of the flatbed truck with crane is shorter than that of the crane;
2. The width of the truck-mounted cargo box is 2300mm, and both sides of the truck-mounted flat-bed transporter can be equipped with manual telescoping or hydraulic telescoping, and the full extension can reach about 3 meters;
3. The bottom plate of the truck-mounted crane is 4mm and 5mm thick, and the bottom plate of the truck-mounted flatbed truck is 10mm thick;
4. Channel steel is used at the bottom of the truck-mounted crane, and square tube steel is used at the bottom of the truck-mounted flat-bed transporter due to the transportation of the excavator;
5. The rear ladder of the truck-mounted flat-bed transporter can be made manual or hydraulically controlled, and the ladder can be made into a double-layer ladder as required.
