When it comes to aerial work vehicles, there are several types of boom types, such as telescopic boom, folding boom, and lifting platform, which are all controlled by hydraulic systems.
Today, how about focusing on the Foton Aumark 26 meters aerial lift truck in the 349th batch?
The chassis of this car uses the Foton Omark S3 single-row cab with a body width of 2.06 meters. It is equipped with an electric air conditioner integrated with heating and cooling as standard, central lock + electric windows + remote control + manual adjustment;
Four-spoke MP5 multi-function steering wheel + reversing image + no MP3+MP5+ knitted shock-absorbing seat with navigation airbag, hydraulic power steering, ABS and other configurations.
Equipped with Cummins 156 horsepower engine, six-speed gearbox, 4.2-meter wheelbase, rear axle speed ratio of 4.33, front axle 2.85 tons, rear 6 tons, 7.50R16 steel tires, strong bearing capacity.
Foton Aumark 26 meters aerial lift truck is 8.355 meters long, 2.38 meters wide, 3.2 meters high, with a total mass of 10.995 tons and a curb weight of 10.8 tons. The protective materials are all Q235B;
The side protection connection method is bolt connection, the rear protection section size: 150×80mm, the height above the ground is 430mm, and the rear protection connection method is welding connection.
The working height of the upper boom is 26 meters, and the color of the upper body is engineering yellow according to the announcement. The whole vehicle has four hydraulic telescopic legs (up and down telescopic and horizontal telescopic), and 12 oil cylinders;
The outriggers are front V and rear H-shaped, and the boom structure is a three-section six-sided working arm, which is synchronously telescopic and 360° continuous rotation in both directions. The angle of the hanging basket can be adjusted to maintain balance.
Install the emergency pump, and wireless remote control, make stainless steel fence and aluminum pattern anti-skid walking platform, and others are prepared according to factory standards. The rated load of the working bucket is 200kg.
Operating features: four operating modes: remote control, electric control, manual, and emergency, the operating position is a turntable and remote control.
Control form: ZYK bus control system, electro-hydraulic proportional control system, realizing step-less speed regulation. The turntable operation and production operation room can be sun-proof and rain-proof, which looks very high-end.
In general, this Foton Aumark 26 meters aerial lift truck is a good choice in terms of workmanship and quality;
It can be widely used in the installation, maintenance and climbing operations in such industries as municipal administration, electricity, street lights, advertising, communications, photography, gardens, shipbuilding, transportation, docks, airports and ports, emergency rescue, and large industrial and mining enterprises.
