In the 4 meters cylinder transport truck, there are many brands, such as Jianghuai Junling, Dongfeng Dorica, Jiefang tiger V, Jiangling Shunda and other light truck brands. How to choose these brands? Let’s have a look! Jac Junling 4 meters cylinder transport truck adopts JAC Junling V5 single row 1900 wide cab, 3 seats, standard configuration, central lock, remote key, electric doors and windows, multi-functional steering wheel, original air conditioner, air brake, electric heating rearview mirror, etc; The power is equipped with Weichai 130 HP engine, the fuel consumption value is 10.83 (L) / 100 (km), matched with a 6-speed gearbox, and the power is sufficient. It adopts a 3365mm wheelbase, front plate, speed limit, front exhaust pipe, 4.5t rear axle, 700r16 tire, 180 *

A Dongfeng 45 Meters Boom Lift Truck developed by Cheng Li Group, let’s take a look at what this car is there! This car uses Dongfeng Dolly D9 row and half 2.135 meters wide cab, standard with electric glass, central lock, remote control key, off-gas brake, ABS, multi-function steering wheel, air conditioner; Equipped with Cummins 210 horsepower Euro vI engine, matching Tri-six-speed transmission, using 250mm straight bus, 295/80R22.5 vacuum fetus, 8T Dena rear bridge, strong carrying capacity. The total mass of this car is 17.7 tons. The large arm is a seven telescopic arm. The homework height is 45 meters. The front end of the arms is produced. The platform is 400kg, and the rated carrier is 2 people. Under the protection, the production of

Today, let’s take a look at Kama 13.5m Cherry Picker Lift, and let’s take a look! This car uses Kema K1 new 1580 white single row to flip the cab, which is equipped with Liuzhou Wuli 83KW Euro VI engines, 1.5L displacement, matching Monwo 5 gearbox; With the original spline power, the 140 straight-through light truck beam, 2.5 tons of rear bridge, 185R14 tires, oil brakes, ABS, original air conditioners, electronic boosts, 12V camel cells. This car is 5.995 meters long, 1.88 meters wide, 2.9 meters high, and is manufactured as a three-section folding arm, standard with a 1-ton hook, the highest work height is 13.5 meters. It is made of pattern, and the stainless steel pipe box is made, and the steel toolbox is

Many people now choose Aerial Work Platform Truck, they will first consider small models, because the homework height can also do about 20 meters, this large arm is a telescopic arm, although the price is expensive but practical. In this model, we will first consider JMC 18M Telescopic Boom Aerial Work Platform Truck. Using JMC Shunda Six single-row cab, the chassis model is JX1041TG26, 115 horsepower diesel engine, with direction assist, 3360 wheels under, 7.00R16 steel wire, five gearboxes, oil brake, air conditioning, other according to Euro six standard. The upper arm is 18 meters, and the color is colored as a project, the whole vehicle is used as yellow, and the whole vehicle has four hydraulic telescopic legs (upper and lower telescopic and horizontal

The following small series recommends a Dongfeng KR 100K Anti-Collision Buffer Car, let’s take a look at its specific configuration! Chassis description:Chassis configuration: Cummins 210 horsepower (6-cylinder machine), 10.00R20 steel wire, 4500mm wheelbases, Dongfeng 6 speeds. Modification instructions:With imported 100km / h anti-collision bag, flip bracket driving mode: hydraulic drive, effective interception length: 2300mm, effective anti-collision area: 1.87m2, buffer rating: Nchrp350TL-3 2000kg-100km / h, through traffic safety facilities Quality Supervision The center (Zhongxiao high-tech traffic detection is limited), and the anti-collision buffer device of the test report is obtained. After reading this 100K Anti-Collision Buffer Car, are you interested?