In the past dining trucks, the single bridge is generally the main one. In the announcement of a new dining truck in the 348 batches of automobile announcements, a Sinotruk SITRAK large mobile food truck appeared;
The car body of the rear double bridge is smaller than that of the single bridge, let’s take a look at how it is!
This car adopts Sinotruk SITRAK G5-M series cab, standard equipped with four-channel ABS, Bosch steering gear, airbag seat, electric glass, central control lock, remote control key;
Adjustable multi-function steering wheel, electric adjustment with a heated rearview mirror, etc., from the configuration point of view, the ride comfort is still very high.
The power is equipped with Weichai 270 horsepower, matched with Howo 9-speed gearbox, using 4300+1350mm wheelbase;
5.5 ton front axle, 11 ton double rear axle, 280 frame, 11.00R20 steel wire tire, 300L aluminum alloy fuel tank and other configurations, the bearing capacity is good.
In the upper part, the vehicle is 9.46 meters long, 2.55 meters wide, and 3.9 meters high. The total mass is 16 tons, the curb weight is 14.87 tons, and the rated load mass is 10 tons;
The top of the carriage is closed and cannot be opened, and the outer 2mm aluminum flat plate and the inner 1.5mm stainless steel plate are used;
The inner steel frame in the middle is filled with polyurethane, which not only improves the overall strength of the box but also improves the effects of heat preservation, heat insulation, waterproofing and moisture resistance;
It can fully meet the environmental conditions of the northern alpine region, which is clean, hygienic and beautiful.
The two sides of the box can be unfolded, half unfolded operation, two windows on each side of the flap on both sides;
A rear door is made at the tail, and a pull-out ladder is made underneath, which can be retracted when not in use, and two climbing ladders are made on both sides of the door to facilitate up and down.
A half-skirt box is made under the car body, and a tool box door is left so that it will be much more convenient and beautiful in later use;
Some toolboxes can be used to store the tools used in daily life.
Install anodized aluminum plate on the floor of the compartment, which is not only non-slip but also durable and beautiful; it will also be padded with a PVC non-slip floor mat.
There are 3 sets of stainless steel stoves installed in the compartment, including cooking stoves and stew stoves;
Also installed are hoods, kitchen sinks, kitchen cabinets, wall cabinets, storage cabinets, water purification tanks and other kitchen appliances.
Electric appliances such as refrigerators, water pumps, diesel generators, rice steaming cabinets, and waterproof sockets are also installed.
Several venue lights will be installed on the top of the car body so that it can be seen at night. There is a fence on the top and a safe climbing ladder beside it, which is convenient for the staff to get on and off.
There are water, electricity, and oil control systems installed on the vehicle to control all water, electrical, and oil switches of the vehicle.
The hydraulic control system is used to control the deployment of the flaps on both sides. A 50-meter cable winch will also be installed, including a manual cable reel.
There are sewage tanks, auxiliary oil tanks, hydraulic oil tanks, etc. installed at the bottom of the vehicle, and the space has been rationally used.
It can be said that this Sinotruk SITRAK large mobile food truck has more space than the single bridge. The cooking area can be cooked by three chefs at the same time, which improves the efficiency and can guarantee more people to eat outdoors. It is more practical than a single bridge.
