Today, the editor of Cheng Li will introduce to you the process of loading garbage in a garbage truck with after-loading compactor. The following is a detailed diagram and description.
The after-loading compactor garbage truck is a special vehicle used to collect and transfer garbage in places with dense populations and high garbage production.
It uses a hydraulic system to compress and crush the loaded garbage through two-way creeping to make it loose The volume of garbage has shrunk sharply, and the compression ratio can reach 4:1. It is the real "big stomach king" in garbage trucks.
The entire tank is sealed with high precision and equipped with a special sewage tank to collect the sewage generated during the transfer and compression of garbage to prevent secondary pollution.
Let's take a look at the true content of the after-loading compressed garbage truck!
Everyone has seen such a domineering and beautiful compression garbage truck, do you really want to know how it loads garbage?
Then the editor will use the structure diagram to explain to you the process of loading garbage in the after-loading compactor garbage truck!
The process of loading garbage in the garbage truck with the after-loading compactor is shown in the figure above:
1. Step 1 is for the sanitation personnel to dump the collected garbage into the garbage hopper, which is the starting position.
2. Step 2 Operate the button to open the scraper.
3. Step 3 The oil cylinder pushes the sliding plate to drive the scraper to move down together, until the scraper is inserted into the garbage hopper.
4. Step 4 is to retract the scraper cylinder to drive the scraper to turn and close.
5. Step 5 is to recycle the skateboard cylinder to drive the scraper upward to scrape the garbage and fill the garbage into the garbage bin. At this time, the whole action returns to the starting position.
6. Step 6 is after multiple collection and filling cycles, the garbage can be compacted into the box again and again until it is full.
7. Step 7 When the garbage is fully collected, enter the garbage treatment plant, open the rear cover of the compression garbage truck and use the push plate to discharge the garbage.This is the whole process of loading garbage in the garbage truck with the after-loading compactor. Is it clear and clear to use the structure diagram combined with the text description?
