Bulk feed transport truck are mainly used to transport finished bulk feed products or raw feed production from feed mills to livestock farms, poultry farms and feed processing users;
At the same time, it can also be used to transport certain non-corrosive powdery and granular raw materials, such as powdered materials for pharmaceutical factories and grain storage turnover.
Feed transport tank unloading drive mode: The bulk feed transport truck has two drive modes, hydraulic and electric, and users can configure them according to their actual conditions.
The current mainstream is electric. The electric type requires an external 380V power supply, and some farms can also use a hydraulic system if it is not convenient to connect to the electricity.
The cost is 10,000 yuan more than the electric dragon.
Bulk feed truck tank electric system, pneumatic sub-storage mechanism, etc.
There is a gate at the bottom of the tank, and a horizontal screw conveyor (commonly known as a horizontal stirring cage) is installed under the gate.
The power take-off is driven by the output power of the automobile gearbox, and then the high-pressure oil pump is driven to drive the hydraulic system.
The hydraulic motor of the bulk feed truck tank drives the blade shaft and blade of the horizontal screw conveyor to rotate through the transmission device, and the feed is output through the movable conveying system (commonly known as the movable stirring cage).
A movable unloading auger on the roof of the car can rotate and lift freely. The spiral tube at the top lies on the top of the tank during transportation; it is lifted when unloading.
The bulk feed truck tank connects the discharge port of the tube end to the livestock and poultry.
The feed gate on the top of the storage tank of the feedlot is connected and aligned to complete the unloading.
We all know that bulk feed trucks are mainly used for the transportation of powdered or granular materials such as feed, grain, drugs, etc.
It can free labor from heavy physical strength, and can greatly reduce the cost of feed transportation and improve feed delivery. s efficiency.
