Dongfeng 3.5 ton Water Tank Fire Truck Technical Specification

1. Main parameters of the vehicle

Second, the main parameters of the chassis

Chassis model	EQ1090SJ8BDC	manufacturer	Dongfeng Motor Co., Ltd.
Engine rated power	115kw	engine capacity	3856ml
Engine emission standards	GB17691-2005 National V	Drive form	4×2
Wheelbase	3800mm	Cab structure	Flat head, four doors, original double row
Minimum turning radius	≤14m	Number of passengers	2+3 people
Gearbox	Manual	Driver position	Left
device	Fire control instrument panel and police light control box are installed at the original car dashboard1. Alarm;2. Power switch control switch and indicator light;3. Additional power switch;

3. Bodywork structure and performance parameters

General layout	The vehicle is composed of two parts: the firefighter’s cabin and the body. The body layout adopts an integral frame structure.Inside the water tank, the equipment box on both sides, the pump room at the rear, the tank body is a parallel cuboid box type tank.

1. Equipment box and pump room

	The main frame structure is welded with high-quality square tubes, and the outer decorative plate is welded with carbon steel plates. The roof is non-slip and can be walked on. (Aluminum alloy square tube welding can be used according to user needs)
	The equipment boxes are located on both sides of the rear of the passenger compartment, and are equipped with aluminum alloy rolling doors with lighting lamps inside. Storage boxes are set in the equipment box room according to demand. The lower part of the side is provided with a flip pedal.
	The pump room is located at the rear of the vehicle, with aluminum alloy rolling shutters on both sides and the rear, with lighting lights inside, and flip pedals on the lower sides of the pump room. Insulation position: install fuel heater (optional according to customer requirements)

2. Water tank

capacity	3500kg
Material	High-quality carbon steel with a thickness of 3mm (can be made of stainless steel and PP according to user needs)
Tank fixing	Flexible connection with chassis frame
Tank settings	One manhole with a diameter of 460mm, with quick locking/opening device, one DN65 overflow port, one DN40 water tank for surplus water outlet, ball valve, water inlet and outlet: one water tank to the pump inlet pipe, DN100 The valve can be controlled pneumatically and manually, with a water pump to the water filling pipe of the tank, and the DN40 valve can be controlled pneumatically and manually

3. Fire pump

model	CB10/30-XZ low-pressure vehicle fire pump
form	Atmospheric centrifugal
Limited Data	30L/s @1.0MPa
Rated outlet pressure	1.0MPa
Maximum suction depth	7m
Water diversion device	Built-in sliding vane pump
Diversion time	Maximum suction depth≤35s

4. Fire monitor

model	PS30W
manufacturer	Chengdu West Fire Machinery Co., Ltd.
Rotation angle	360° horizontal rotation
Maximum elevation/depression angle	Depression angle ≤-15°, elevation angle ≥+45°
flow	30L/S
Range	≥55m

5. Fire control system The control panel mainly includes two parts: cab control and pump room control

Additional electrical	Set up an independent circuit
Auxiliary lighting	Firemen’s room, water pump room and equipment box are equipped with lights respectively, and lighting and indicator lights are set on the control panel
Strobe light	Install red and blue strobe lights on both sides of the body, and install a 35W fire searchlight at the rear of the bodywork
Warning device	Long row of red warning lights, installed on the top of the cab siren, and its control box is below the front of the driver