JAC’s light truck series have also received unanimous praise from everyone in the market, especially the Junling series of light trucks, which not only look stylish and stylish but also have good configuration, such as this JAC 4m medical waste truck!
This car uses the JAC Junling V5 single-row middle-body cab, which is equipped with air conditioning, steering assist, oil brake, central lock, electric windows, ABS, electric heated rearview mirrors, etc. as standard;
It is equipped with a Weichai 130-horsepower Euro VI diesel engine and a five-speed gearbox; it uses 7.00 steel wire tires, which is a dangerous goods transport vehicle chassis.
The vehicle is 5.995 meters long, 1.995 meters wide, and 2.8 meters high. The total mass is 4.495 tons, the curb weight is 3.21 tons, and the rated load is 1.09 tons;
The body is 4.03 meters long, 1.87 meters wide, and 1.75 meters high. It is a light medical waste transfer vehicle.
Car body configuration: The insulation performance of the car body reaches Class A standard. The refrigerated car body is made of advanced wood technology and selected non-toxic chemical raw materials of international and international famous brands;
The rigid polyurethane and reinforced materials with the best heat insulation performance are used to press, heat, and vacuum through a special mold to form a plate at one time. The high-strength imported adhesive is used to lap the polymer composite box, which has good sealing performance. Not easy to bulge and leak.
The cooling speed in the box is fast, the heat dissipation is slow, and the heat preservation effect is good. The boxboard is connected by Q195 galvanized pipe 40604 and environmentally friendly waterproof wood board with screws, thickened by 2.0 thick Yinuo FRP, and the outer frame is made of Shanghai Baosteel stainless steel;
All are stainless steel hinges, locks, corners, hinge seats, lock levers, handles, smooth and ultra-thick and durable. The sub-beam of the bottom plate is folded by 6 thick hot plates of Wuhan Iron and Steel Co., Ltd. and fastened with screws, which is strong and durable.
Car features:
(1) The medical waste transfer vehicle is designed according to the characteristics of medical waste transportation. The car body is fully enclosed, and the rear door is a double-layer enclosed structure (double rear doors and inner opening doors are set, and the inner opening door is equipped with gas springs. , To facilitate the opening of the inner door up and down) to ensure that the medical waste contained in the compartment is separated from the outside, and at the same time facilitate the loading and unloading of the goods.
2) The inner wall of the compartment is made of stainless steel, which is resistant to acid, alkali and other corrosive disinfectants. The outer plate is a glass steel plate, and the surface is smooth and flat. Stainless steel guard plates are installed on both sides to fix the stainless steel cross brace in the compartment to prevent the turnover box from turning over and leaking during driving. The bottom circumference and corners of the carriage should be smoothly treated. Dead corners should be cleaned for easy disinfection. Corrosive disinfectant can be used in the box.
(3) Ultraviolet germicidal lamps are installed on the inner surface of the car roof. When the ultraviolet germicidal lamps work normally, they radiate a large amount of 253.7nm ultraviolet light, which is extremely harmful to microorganisms and can kill bacteria within 30 to 45 minutes. The disinfection spray function can achieve the disinfection and sterilization effect more accurately and without dead ends.
(4) A refrigeration unit is installed in the carriage, and the temperature in the cargo compartment can be controlled within the specified temperature range through the refrigeration unit to inhibit the reproduction of bacteria in the cargo compartment.
(5) The vehicle has the properties of airtightness, anti-seepage, and dustproof; it has the functions of antibacterial, flame-retardant, corrosion resistance, easy to clean and eliminate. An automatic spray device is installed inside the compartment, which can perform automatic spray disinfection and sterilization. Use low-temperature disinfection, ultraviolet disinfection, and spray disinfection.
(6) Sewage discharge: A sewage hole is opened on the bottom of the carriage near the front inner panel, and a sewage pipe made of stainless steel is installed to facilitate the smooth discharge of the disinfectant.
(7) Collection of waste liquid: The lower end of the sewage pipe in the compartment is designed with a heat-insulating wastewater collector made of stainless steel, which can effectively collect and store 2 to 3 kg of waste liquid. A stainless steel ball valve and connecting pipe are installed at the lower end of the collector to ensure that the waste liquid does not leak and can be easily drained
(8) There are special medical waste and warning signs on the front, back and sides of the medical waste transfer compartment. The name of the medical waste transfer unit is sprayed on both sides of the cab.
(9) The metal accessories have undergone phosphating treatment before coating, sprayed with polymer anticorrosive primer and metal topcoat, with strong adhesion, good corrosion resistance, uniform paint film, bright and durable color, improved aesthetics, and can withstand dampness and humidity. In adverse environments such as dust and salt spray, long-term use will not cause cracking, peeling, and color fading.
(10) The sidelights and top lights of the whole vehicle are complete, and the body is eye-catching at night, ensuring the safety of night work and driving.
(11) Reflective signs are pasted on the rear and sides of the vehicle. Reflective signs of vehicles mainly play a role at night, which can improve the recognition of the body and make the rear vehicles pay attention to avoidance in time, thereby reducing the possibility of accidents.
This JAC 4m medical waste truck belongs to the transportation of infectious substances, and its category number is 6.2. Before leaving the factory, it will also install dangerous triangle lights, fire extinguishers, anti-static belts, etc., and affix dangerous goods signs and other accessories.
