JMC negative pressure medical waste transfer vehicle product description

The working principle of the negative pressure medical waste transfer vehicle is very similar to that of the negative pressure ambulance, but there are many differences, such as the manufacture of the car body and the disinfection process.

JMC negative pressure medical waste transfer vehicle
JMC negative pressure medical waste transfer vehicle

Today we will take a look at this JMC negative pressure medical waste transfer vehicle!

This car uses the Jiangling Shunda N600 narrow-body cab, standard with air conditioning, steering assist, oil brake, central lock, electric windows, front exhaust pipe, front disc brake, speed limit, dual Early warning.

JMC negative pressure medical waste transfer truck
JMC negative pressure medical waste transfer truck

It is equipped with Jiangling’s 115-horsepower National VI diesel engine, matched with a 5-speed gearbox, with a 3.36-meter wheelbase, 7.00 steel tires, and other configurations. It is still a popular brand among light trucks.

The vehicle is 5.995 meters long, 2.01 meters wide, and 2.9 meters high, with a total mass of 4.495 tons; the car body is made into an insulated car body with a length of 3.96 meters, a width of 1.84 meters and a height of 1.75 meters;

The car body is made of stainless steel and glass fiber reinforced plastic, 6 cm thick insulation board in the middle, and a single side door is opened on the right side of the car body. Inside the car body is installed an ultraviolet germicidal lamp, spray disinfection system, negative pressure system, and a negative 5-degree refrigerating unit;

JMC negative pressure Medical waste transport truck
JMC negative pressure Medical waste transport truck

Anti-collision panels are installed on both sides of the car body, and the rear of the car body is made of a closed stainless steel double-layer door, and the car body is sealed without leakage. A sewage collection box and a disinfectant tank are also installed under the car body.

Medical waste truck negative pressure equipment
Medical waste truck negative pressure equipment

There are five types of disinfection procedures for JMC negative pressure medical waste transfer vehicles:

  • 1:Turn on the negative pressure system, perform PM2.5 filtration, activated carbon filtration, and antibacterial filtration;
  • 2:Carry out ozone elimination, the elimination efficiency is 10 cubic meters/min, which belongs to the gas elimination operation;
  • 3:Perform ultraviolet disinfection, turn on the national standard ultraviolet disinfection lamp, it is an optical disinfection operation;
  • 4: perform spray disinfection, turn on the electric spray tube, it belongs to the disinfection water disinfection operation; fifth
  • 5: perform low-temperature disinfection, turn on refrigeration The car unit makes the internal temperature of the compartment reach minus 5 degrees. It is a low-temperature anti-virus, five major disinfectants and a stainless steel fully-sealed cabinet, and the negative pressure environment makes the transportation of medical waste safer.

This JMC negative pressure medical waste transfer vehicle is safer and more reliable than ordinary medical waste transfer vehicles to transport goods. Which one would you choose?

en English
X