60m3 bulk feed truck semi trailer walking part configuration: front wing plate web 8mm and 10mm under the web (double layer) middle 8mm rear wing plate height 480mm, W high-strength bending type/straight beam through beam, 90# Traction pin, 28 tons of outriggers, 13 tons of Guangdong Fuhua Bridge, axles/3 axles, 16 tons of brake pads, tires 12.00R20/12, ABS, 16X8 leaf springs, a 1200mm tool box, a spare tire holder, pneumatic There are four large rooms and two small rooms.
60m3 bulk feed truck semi trailer Top configuration: The tank body is made of 4mm high-quality carbon steel plate, and the whole vehicle has 4 electric screw augers, driven by 4 5.5KW motors (Imbon Siemens), and the top screw auger is hydraulically controlled to lift, which can be rotated 180° left and right, and six tanks. Independent sub-silo, can independently control the unloading sequence and speed of each sub-silo, the unloading pipe inclines 60 degrees, the vertical unloading height is 8.5 meters, the whole vehicle unloading time is 50 minutes, and the rest is standard.
Bulk feed trucks are currently the most popular special vehicles, and many breeding and feed industries are competing to purchase this model.
The feed tank of the bulk feed truck is erected on the chassis of the truck, and the top of the tank has a feed inlet. A screw conveying unloading pipe (commonly known as unloading auger) at the top can rotate and lift freely, and the elevation angle of the lift can reach 60 degree.
During transportation, the spiral tube at the top lies on the top of the tank; when unloading, it is lifted so that the discharge port at the end of the tube is connected with the feed door on the top of the storage tank of the livestock and poultry farm. The cab is equipped with a control device (operating The device can also be installed at the end of the tank. When unloading, the screw is driven by the power output shaft and the reducer under the vehicle to complete the unloading.
At present, our company bulk feed truck mainly launches 3T, 5T, 8T, 11T, 15T and 22T, 30T, 40T and many other tonnage models.
At present, the unloading methods of bulk feed trucks are divided into two types:
Electric unloading method (applicable to feed loading, unloading and transportation in places with three-phase power supply; if three-phase power is not available, an on-board generator can be installed);
Hydraulic unloading method (applicable to feed loading and unloading and transportation in non-power supporting places). Their general structure is the same but the driving method is different.
All of them use blade augers to rotate to realize the lifting and conveying of feed to the feed tower. It is widely used in all kinds of large, medium and small livestock and poultry farms and feed processing enterprises. The power adopts the transmission mode of three-phase power supply or automobile power-driven generator to generate electricity (optional). Users can flexibly switch according to the actual situation on site, so that some free-range households who do not have three-phase power supply can also complete the process of bulk feed.
The unloading method adopts the mechanical screw, the unloading speed is fast, and the continuous operation is possible, which greatly improves the production efficiency. The tank is divided into three silos, which are loaded with different feeds at the same time; each part has a simple structure, convenient operation, economical application, fast and efficient, easy maintenance, and perfect after-sales, so you can use it with confidence.
