12m3 garbage compactor truck has the following features:
●Key components such as control valves, oil cylinders and connecting pipelines of the hydraulic system have advanced structure, reliable performance, simple operation and convenient maintenance;
●The advanced electric control system adopts imported PLC (programmable logic controller) integrated control, integrated control of electromechanical fluid, and high degree of automation;
●The push plate control valve is equipped with a back pressure valve. While realizing bi-directional compression of garbage, the push plate can automatically move to the front of the box, thereby adjusting the space for containing garbage, and the loading efficiency is high;
●Exquisite streamlined appearance design, the upper part adopts special high-strength anti-corrosion steel plate, which improves the service life of the vehicle;
●Convenient operation control The operation control box is installed in the cab and the rear of the car respectively.
The operation control box in the cab can control the pushing and discharging and select the operation mode (such as automatic or manual), and the operation control box at the rear controls the pressure filling The operation of the mechanism and barrel turning mechanism is very convenient to use and operate.
●Automatic engine power output control, that is, throttle control can be fully automated through the electrical system to meet the power requirements of the garbage pressure filling cycle and pushing and discharging.
Under other operating conditions, the engine is automatically at idle speed to reduce power consumption And the incidence of failures, reduce fuel consumption and improve the economy of use.
●Optional post-installation monitoring system is convenient for visual loading and unloading operations in the cab.
●Double insurance system, the operating system has dual functions of automatic control and manual operation, which greatly protects and improves the utilization rate of the vehicle.
●The specially set emergency brake button can stop the garbage pressure filling mechanism in any state or any position, to ensure the safety of operators and equipment.
●There is a turnover mechanism suitable for square barrels and round barrels and a bucket device for collecting bulk garbage. Users can choose different collection mechanisms according to different garbage collection methods.
12m3 garbage compactor truck flip structure:
A. With bucket-type flipping-① can flip 2 standard 240 liter plastic buckets or 660L hanging barrels; ② flip 1 standard 240 liter plastic bucket and 300 liter iron bucket;
B. Swing arm with swing arm-the swing arm with compression swing arm can be turned over by 2.5 cubic meters;
C. Fully enclosed tipping device-no secondary pollution during transportation, you can hang a trolley and manually load garbage;
D. Skip bucket-type turning device-manual shovel can be used to shovel garbage into the bucket for compression and transportation;
E. With rear sealing cover-can be installed with hanging barrel or without overturning mechanism;
F. With manpower cart turning device-can turn over the garbage in the manpower two wheel small cart;
G. No overturning mechanism-can cooperate with hook arm to dump garbage;
Optional configuration of Dongfeng Tianjin 12m3 garbage compactor truck: rear with barrel turning device, which can hang a 240L national standard plastic garbage can and a 300L iron drum at the same time; the rear loader with semi-sealed dustpan, or with pneumatic sealing cover, or With fully sealed bucket.
